Tank Pad and Fuel Cap Pad For TVS Apache RTR 200 4V
Material : PCHC Process Vinyl and Resin
Design : Reflective and Chrome Graphics.
Fits : TVS Apache RTR 200 4V
High Quality Epoxy and Self Adhesive
Excellent Machine Cut Outlines.
Easy Peel N Stick Application, Strong Glue.
Tank Pad covers maximum area protecting from direct sun light and scratches.
Fuel Cap Pad with matching graphics of Tank Pad.
Contents : One Fuel Cap Pad.
One Tank Pad Set .
Application Tips :
1. Prior to installing your new tank pad, set it in the sun or gently warm with a hair dryer or hot air gun and allow it to warm and soften, so that the tank pads will conform to your motorcycle tank contours. NOTE: Some air bubbles will need to be smoothed out.
2. Application surface must be clean, dry and free of dirt, oil and grease.
3. Make sure alignment of the tank protectors is perfect before application.
4. Remove backing wax paper from the tank pad and apply.
5. Start from one side and smooth out any air bubble as you go along.
Pimp your sport bike with this genuine product - this is a top quality tank pad to have your motorcycle stand out in the crowd. As you know, your sport bike is designed for your body to hug the gas tank! Protect your motorcycle tank from scratches caused by jacket zippers or belt buckles!
NOTE : Actual colors may slightly vary due to monitor settings and lighting source during photo shoot.
Disclaimer : All company and brand names, logos and trademarks™ or registered® trademarks belongs to their respective holders. Use of them does not imply any affiliation with or without endorsement or manufactured by them.
|Warranty||7 Days Replacement Warranty, only if manufacturing defects and unused condition.|
|Compatible For Vehicle||Apache RTR 200 4V|
|Product Type||Reflective Graphics|
|Material||Epoxy Resin and Vinyl|
|Easy Peel 'N' Stick||Yes|
|Product Dimension L*B*H (Cms)||Not Applicable|
|Package Dimension L*B*H||30*30*1|
|Package Contents||One Set Tank Pad and Fuel Cap Pad.|